Prolific Usb Serial Driver 3.3.2.102

Scroll to the LPT/COM port and double click Prolific USB to Serial Comm Port; Click Drivers in the Properties section; The Driver you choose should read '3.3.2.102 with an appropriate date attached; If the date is wrong then it means the wrong driver was installed; Unplug the Serial adapter and run the steps again to install the correct driver. The Ultimate USB Serial Adapter. PC / Mac / Linux. Designed to make serial port expansion quick and simple. Connecting to a USB port on your Tablet PC, notebook or PC, this USB-COM Plug-in adapter instantly adds RS-232 serial communication port to your system. The product is the smallest and most flexible USB to RS-232 Plug-in Adapter.

Article credit goes to: ifamilysoftware.com
---

The 'Driver Version' must say '3.3.2.102' dated 09/24/08. If not, then the correct driver is not installed. Unplug the USB-To-Serial adapter and run the 'PL230364bitInstaller.exe' again - following the directions precisely until the correct driver appears. 2．USB-To-Serialアダプターを抜きます。そして”PL230364bitInstaller.exe”をダブルクリック。 3．”plug in one(1) of your USB-To-Serial adapter” と表示されたらUSB-To-Serialアダプターを差し込みます。そしてContinueをクリック。.

Purpose of this article is to guide you on how to FIX the 'Prolific USB-to-Serial' driver issue with common cheap units.

In summary, this article is for: Windows XP, Windows 7, Windows 8, Windows 8.1 and Windows 10. Works on 32/64-bit.

And it addresses issue of: Prolific PL-2303 Driver Fix (VID_067B&PID_2303)

Driver issue will show inside your Device Manager like this:


(Notice in above picture, yellow triangle next to 'Prolific USB-to-Serial Comm Port (COM X)'. That means correct driver version is not installed.)

And if you double-click on it, you will see:

Prolific Usb Serial Driver 3.3.2.102

(Notice in above picture, Code 10 error. This confirms you need to install correct driver file.)

Issue will also may show messages like this:

  • 'This Device cannot start (Code 10)'
  • 'No driver installed for this device'
  • 'Device driver was not successfully installed'

Available forum solutions to this problem are half-baked. Even vendors selling their 'USB to Serial' adapters are baffled.

Prolific Usb Serial Driver 3.3.2.102

Main cause of this issue is because the device you own contains a counterfeit 'Prolific' chip (China clone).

The counterfeit chip use the same Vendor ID (VID_067B) and Product ID (PID_2303) - as the authentic Prolific chips.

To solve this intellectual infringement - original Prolific company modified their newest drivers to render the counterfeit adapters unusable. Unfortunately this decision also renders all earlier adapters inoperative.

The Prolific 64-bit drivers that Microsoft supplies via Windows Update, Versions 3.4.67.325, 3.4.25.218, 2.1.51.238 and 3.4.62.293 - will not work with most adapters and therefore shows the generic 'Code 10' error.

Or you may get no error at all, but your device will still not work.

If your adapter was working prior to going to Windows Update, you can 'roll back' to the previous installed driver and all will be well once again.

However if you didn't have a previous driver installed that worked - you'll have to go through the process of removing any PL-2303 driver installation programs, the actual driver files, and the information (.INF) file, BEFORE you are able to successfully install the correct driver.

(What worsens this issue is that there are many 'Prolific Driver Removal Tools' that do not work properly.)

And Windows 8, 8.1 and Window 10 are set by default to automatically update your drivers without your permission or even notifying you of the update.

So no matter how many times you remove the driver files and reboot - the next time you insert the USB-To-Serial adapter, Windows installs the newest non-working version again.

Only 64-bit driver I have ever found that works with all the 'Prolific' adapters is Version 3.3.2.102.

Below installer program will remove all of the incompatible drivers — make a change so that Windows can never update the driver without your approval — and install the Version 3.3.2.102 compatible drivers.

  • All Windows 64-bit operating systems including Windows 10
  • Prolific USB to Serial Adapter .
  • Device using PL-2303 H/HXA/HX/X version chips
  • Driver Version: 3.3.2.102
  • Driver Date: 09/29/08
  • Supported device ID and product strings: . VID_067B&PID_2303 for 'Prolific USB-to-Serial Comm Port'

Steps:

  1. Download and save the 'PL2303_64bit_ Installer.exe' by clicking here.
  2. Unplug all USB-To-Serial adapters from your computer - and double-click on 'PL2303_64bit_Installer.exe'
  3. When it prompts you, plug in one (1) of your USB-To-Serial adapters and click 'Continue'.
  4. Reboot your computer. That's it!

Troubleshooting:

You must follow ever step in the process in exact order.

  1. If you still receive an error after running the PL-2303_64bit_Installer.exe and your device is plugged in - go to Windows Device Manager.
    • Windows Vista/7/8/10: Control Panel » System » Device Manager
    • Windows XP: Control Panel » System » 'Hardware' tab » Device Manager
  2. Scroll down to Ports (Com & LPT) and double-click on 'Prolific USB-to-Serial Comm Port (COM#)'.
  3. In the Properties Window, Click on 'Driver'.

The 'Driver Version' must say '3.3.2.102' dated 09/24/08.

If not, then the correct driver is not installed.
Unplug the USB-To-Serial adapter and run the 'PL2303_64bit_Installer.exe' again - following the directions precisely until the correct driver appears.

Windows 32-bit Fix:
  • All Windows 32-bit operating systems from XP up
  • Prolific USB to Serial Adapter .
  • Device using PL-2303 H/HXA/HX/X version chips
  • Driver Version: 2.0.2.8
  • Driver Date: 11/20/07
  • Supported device ID and product strings: . VID_067B&PID_2303 for 'Prolific USB-to-Serial Comm Port'

Steps:

  1. Download and Save the 'PL-2303_Driver_ Installer.exe' by clicking here.
  2. Run the installer program. If it offers a choice to remove the driver, then select to remove the current 'bad' driver.
    Then run the installer again to install the correct driver.

Troubleshooting:

  1. If you still receive an error after running the PL-2303_Driver_Installer.exe and your device is plugged in, go to the Windows Device Manager.
    • Windows Vista/7/8/10: Control Panel » System » Device Manager
    • Windows XP: Control Panel » System » 'Hardware' tab » Device Manager
  2. Scroll down to Ports (Com & LPT) and double-click on 'Prolific USB-to-Serial Comm Port (COM#)'.
  3. In the Properties Window, Click on 'Driver'.

The 'Driver Version' must say '2.0.2.8' dated 11/20/07.

If not, then the correct driver is not installed. Unplug the USB-To-Serial adapter and run the 'PL2303_Driver_Installer.exe' again, following the directions until correct driver appears in Device Manager.

Removal of this tool:

The Prolific 32-bit PL-2303_Driver_Installer is a 'Program' file and therefore installed to your computer and must stay. If you want to delete it - use the Windows 'Uninstall a Program' or 'Add or Remove Program' feature - however this will also uninstall the driver itself.

--
Key words: Sabrent, SBT-USC1M, Prolific, PL-2303, PL2303, USB to Serial, VID_067B, PID_2303, Code 10

Potential Symptoms

  • USB to Serial driver does not install correctly.
  • Error log in Venus 1500 Device Manager shows error -10 and -12.
  • USB to serial driver shows up with an issue (yellow exclamation) in device manager.
  • Sign running, but no communication.
  • Installing prolific adapter on another computer results with the same errors.
  • Error in device manager indicates 'a device which does not exist was specified'.
  • 'Connect Failed' alert in Venus 1500 V4.
  • Device Manager shows error code 28 next to unidentified device.

Environment

Prolific Usb Serial Driver Download

  • Product Family: Message Displays
  • Product:
  • Component: Prolific USB to Serial Adapter, Serial Communications
  • Control System:

Cause

Prolific Usb-to-serial Driver 3.3 2.102 Download

  • Driver/chipset issue.
    • If you are getting an Error Code 10 with a yellow exclamation mark in Device Manager after installing the latest Prolific PL-2303 driver, please contact the cable maker of your product for Prolific chip validity and support

Resolution

Prolific Usb Driver Download

  1. Download driver and install.
    • 64-bit Computer: Install Prolific adapter Version 3.3.2.102, this 64-bit adapter will work with all Prolific adapters.
      • Download and Save the 'PL2303_64bit_ Installer.exe' by clicking here.
    • 32-bit Computer: Install Prolific adapter Version 2.0.2.8, 32-bit adapter.
      • Download and Save the 'PL-2303_Driver_ Installer.exe' by clicking here.
  2. Unplug all USB-To-Serial adapters from your computer — and Double click on the installer saved in above steps.
  3. When it prompts you, plug in one (1) of your USB-To-Serial adapters and click 'Continue'.
  4. Run the installer program. If it offers a choice to remove the driver, then select to remove the current 'bad' driver. Then run the installer again to install the correct driver.
  5. Reboot your computer.

Work Around

  • Order a Moxa USB to Serial cable for replacement.
    • Contact Daktronics technical Support, 1-888-325-7446.

KB ID: DD2090456

DISCLAIMER: Use of this content may void the equipment warranty, please read the disclaimer prior to performing any service of the equipment.

Read the Full Disclaimer

DAKTRONICS DOES NOT PROMISE THAT THE CONTENT PROVIDED HEREIN IS ERROR-FREE OR THAT ANY DEFECTS WILL BE CORRECTED, OR THAT YOUR USE OF THE CONTENT WILL PROVIDE SPECIFIC RESULTS. THE CONTENT IS DELIVERED ON AN 'AS-IS' AND 'AS-AVAILABLE' BASIS. ALL INFORMATION PROVIDED IN THIS ARTICLE IS SUBJECT TO CHANGE WITHOUT NOTICE. DAKTRONICS DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTIES OF ACCURACY, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. DAKTRONICS DISCLAIMS ANY AND ALL LIABILITY FOR THE ACTS, OMISSIONS AND CONDUCT OF YOU OR ANY THIRD PARTIES IN CONNECTION WITH OR RELATED TO YOUR USE OF THE CONTENT. ADJUSTMENT, REPAIR, OR SERVICE OF THE EQUIPMENT BY ANYONE OTHER THAN DAKTRONICS OR ITS AUTHORIZED REPAIR AGENTS MAY VOID THE EQUIPMENT WARRANTY. YOU ASSUME TOTAL RESPONSIBILITY FOR YOUR USE OF THE CONTENT AND ANY LINKED CONTENT. YOUR SOLE REMEDY AGAINST DAKTRONICS FOR DISSATISFACTION WITH THE CONTENT IS TO STOP USING THE CONTENT. THIS LIMITATION OF RELIEF IS A PART OF THE BARGAIN BETWEEN THE PARTIES.

Prolific Usb To Serial Driver 3.3.3.114

The above disclaimer applies to any property damage, equipment failure, liability, infringement, or personal injury claim arising out of or in any way related to your use or application of the content, whether such claim is for breach of contract, tort, negligence or any other cause of action.